Weber Elec. Co. v. E.H. Freeman Elec. Co., 256 U.S. 668 (1921)
Case details
Bluebook Citation
Weber Elec. Co. v. E.H. Freeman Elec. Co., 256 U.S. 668 (1921)
Full caption
WEBER ELECTRIC COMPANY v. E. H. FREEMAN ELECTRIC COMPANY.
Country
United States
Jurisdiction
Federal
Court
Supreme Court of the United States
Decided
June 6, 1921
WEBER ELECTRIC COMPANY v. E. H. FREEMAN ELECTRIC COMPANY.
CERTIORARI TO THE CIRCUIT COURT OF APPEALS FOR THE THIRD CIRCUIT.
No. 273. Argued April 21, 1921.—Decided June 6, 1921.
1. A patented device for fastening together the metal cap and sleeve of an incandescent electric lamp socket, consisting of corresponding recesses and protrusions in the inner surface of the cap and the outer surface of the sleeve, respectively, formed by slitting the metal transversely and stamping it, which lock, against longitudinal movement only, by an automatic snap action when the sleeve is thrust longitudinally into the cap (Patent No. 743,206, claims 1 and 4, November 3, 1903), is not infringed by a construction providing the cap with inwardly extended, riveted studs and the sleeve with bayonet slots which lock with the studs by a longitudinal followed by a rotative movement, and an additional stud in the cap which snaps into a hole in the sleeve, as the rotation is completed, preventing reverse rotative movement. P. 675.
2. The patent in suit having made no provision for a lock against rotative movement between the cap and sleeve, cannot be aided by resort to a later patent to the same patentee, providing a slot and projection to overcome the deficiency. P. 675.
3. In view of the prior art, the patentee’s concessions made in the patent office, and his later patent, held that the words “telescopically received” and “telescopically applied,” as used in the patent in suit, must be restricted to a direct longitudinal movement or thrust of the sleeve into the cap. P. 676.
4. One who has specifically narrowed his claim in the Patent Office in order to secure his patent, may not afterwards, by construction or resort to the doctrine of equivalents, give to it the larger scope it might have had if not so amended. P. 677.
262 Fed. Rep. 768, affirmed.
The case is stated in the opinion.
Mr. Charles Neave, with whom Mr. Frank C. Curtis was on the brief, for petitioner.
Mr. Livingston Gifford, with whom Mr. David P. Wolhaupter was on the brief, for respondent.
Mr. Justice Clarke delivered the opinion of the court.
This is a suit for infringement of Letters Patent of the United States, No. 743,206, granted to August Weber, Sr., on November 3, 1903. The District Court held claims 1 and 4 valid and infringed, but the Circuit Court of Appeals, while affirming the validity of the claims, reversed the holding that they were infringed. A supposed conflict of this decision as to infringement with one by the Circuit Court of Appeals of the Second Circuit, with respect to the same patent, serves to bring the case here for review on writ of certiorari.
The patent is a simple and, as we shall see, a narrow one. As described in the specification it relates to new and useful improvements in Incandescent-Electric-Lamp-Sockets, the principal object of which is to provide a simple and effective automatic lock or connection between the sleeve and the cap of such a socket.
Nothing new electrically or in the general form of the cap or sleeve is claimed,—the invention relates solely to the method of fastening the overlapping cap to the sleeve, or, as it is sometimes called, the shell or casing.
The validity of the claims involved is conceded in argument, and, having regard to the disclaimer with respect to claims 2 and 3, which has been filed by the petitioner since the decision by the Circuit Court of Appeals, we regard the issue as now narrowed to the infringement of the fourth claim.
The familiar incandescent lamp consists of a glass bulb, attached to a screw threaded base, adapted to be screwed into a properly insulated block, through which the necessary electrical connections are made, and which is p. 670enclosed by a cylindrical “ sleeve ” of sheet metal. In order to complete the lamp this detached sleeve supporting the bulb and inclosing the insulated block must be fitted and securely fastened into the usual cap, which is attached to the wall or fixture, for if the fastening should become loose, the light might fail, or the bulb fall, or a fire hazard be created. To invent a device by which the sleeve and cap could be easily and securely attached to each other and yet be readily detached when desired, was the problem to which the patentee addressed himself, and his solution of it is thus described in the fourth claim of the patent:
"Ina device of the class described, and in combination a pair of members comprising a sheet-metal sleeve having a slotted end, and a sheet-metal cap adapted to telescopically receive the slotted end of said sleeve, one of said members being provided with a recess, and the other having a correspondingly-located transverse slit and the wall on one side thereof displaced to form a projection beveled or inclined toward said recessed member and terminating abruptly at said slit, whereby said members are adapted to automatically interlock with a snap action when telescopically applied to each other, and to be released by manual compression of said slotted sleeve, substantially as described.”
To make the device thus described, it was only necessary to cut two transverse slits, each about one-quarter of an inch in length, in opposite sides of the flange of an ordinary cap, and to then, with a punch or die, force outward the upper edges or walls of the slits to the extent desired to create the necessary “recesses ” which must “terminate ” at the lower, sharp edges of the slits. A similar operation on a slotted sleeve would produce a similar result, but when viewed from the outer surface of the sleeve the recesses would become the projections of the quoted fourth claim. When such sleeve is p. 671telescopically applied to—pushed or pressed into—the cap, it is obvious that with the recesses in the cap and the projections in the sleeve properly positioned and of a suitable size, when the projections shall register with the recesses, the resiliency of the metal will cause the two to engage with a snap action and the sharp lower edges of the slots in the cap will then prevent the cap and sleeve from being separated by a longitudinal movement only, until the sleeve shall be manually compressed to release the projections from the recesses.
It is to be noted, for it will be of significance in the interpretation of the claim involved, that it is required that the projections on the sleeve shall be “beveled or inclined toward said recessed member,” and in the specification it is provided that the projections shall be “beveled or inclined from the inner end of the sleeve toward their outer ends.” With such construction it would seem plain, even without the exhibits, which show it to be true, that, friction aside, projections so beveled or inclined could readily be released by rotative movement from similarly shaped recesses without compression of the sleeve.
It was admitted at the bar that sockets made as specified in the patent in suit were never put upon the market, but the record shows that with a feature added which is covered by another patent owned by petitioner, the socket met with large commercial success. This other patent is No. 916,812 and was granted March 30, 1909, to the patentee of the patent in suit and two others, on an application filed July 18, 1904. Figures 8 and 9 from the drawings of this patent, showing the cap and sleeve of the petitioner’s socket as manufactured by it, will aid in describing the additional “improvement ” which it made to the device of the patent in suit and will also be of service in comparing this device with what is claimed to be the infringing socket of the respondent.
This patent is also for improvements in incandescent electric lamp sockets and contains fourteen claims, of which only the terms of the first need be noticed. It claims as new and useful “a pair of tubular, sheet-metal members, one adapted to telescopically receive the other, having mutually abutting cut-metal edges on the respective members [the slot 19 in the cap and projection 20 in the sleeve], to prevent relative rotative movement, and
automatically interlocking means for preventing a telescopic movement of separation of one member from the other [the recesses 17 in the cap and the projections 15 in the sleeve], said means permitting, without manipulation thereof, the telescopic application of the members to each other.” This language, with slight additions and omissions, not significant, is repeated in claims 3, 13, and 14.
This device for preventing u relative rotative movement ” of the cap on the sleeve is the feature which the petitioner added to the socket of the patent in suit before putting it upon the market and it consists, as the figure supra shows, in the open slot (19) cut to the edge of the p. 673flange of the cap, into which passes the projection on the sleeve (20) when the two are “ telescopically applied ” to each other. This projection (20) is formed by cutting two longitudinal slits in the sleeve and then pressing outward the narrow strip of metal between them. It is perfectly true, as stated in four of the claims and as asserted with much emphasis in the specification, that this added device effectively prevents any relative rotative movement of the cap and sleeve upon each other.
Coming now to the construction of the respondent,
which it is claimed infringes the fourth claim of the patent in suit.
This (respondent’s) socket has been manufactured since 1909, under patent No. 927,344, and it may most readily be described by reference to the above figure 3 of the drawing, which was a part of the specification of the patent.
It will be seen from this drawing that instead of outwardly extending recesses in the flange of the cap, formed p. 674by slits and displacing of the metal, such as are in the petitioner’s socket, respondent’s cap has four inwardly projecting lugs (19), each of which is a separate piece of metal riveted to the flange. Each of these lugs is circular in outline, with a flat inner end or face and presents abrupt shoulders on opposite sides. In the upper edge of the sleeve are three bayonet slots of the familiar form (14), so positioned that the studs on the cap may enter them when the sleeve is slipped into the cap. But when the sleeve has been telescoped, or pushed, into the cap so that the lugs have been pressed to the end or bottom of the longitudinal part of the bayonet slots (14) rotation of the sleeve is obviously necessary to bring them into the transverse parts of the slots, so that the two members will be locked against longitudinal separation. (No such rotative movement of the two members is mentioned in the patent in suit, it is expressly provided against in petitioner’s second patent, and it is not possible in its commercial socket.)
This rotative movement accomplishes a second result.
Reference to the figure, supra, shows a longitudinal slot in the sleeve, which in the key socket affords a passage for the key, but in the keyless socket is narrower, and serves only to render the sleeve compressible. To the left of this slot in the sleeve is cut a round hole (15) so positioned that when three of the lugs in the cap are brought by the rotative movement to the ends of the transverse parts of the bayonet slots the fourth stud will snap into the hole (15). This hole (15) is placed in such a relative position that when the three lugs enter the longitudinal parts of the bayonet slots, the fourth stud rides upon the metal near the edge of the slot in the sleeve, and to facilitate this movement the comer of the slot (16) is bent slightly inward. Thus the adjustment of the studs in the cap is practically a universal adjustment between the cap and shell, so that if any one lug is in p. 675position to enter any bayonet slot two others will be in position to enter the other bayonet slots and the fourth will be in a position to enter the hole (15) when the sleeve and cap have been so pressed together that the (three) other studs have reached the ends of the longitudinal part of the bayonet slots and the rotation described of the one upon the other has been completed. A slight compression of the sleeve suffices to release the members when desired.
This description shows that the structural features of the two sockets are strikingly different. Instead of slits and outwardly extending recesses in the cap of the one there are inwardly extended studs riveted to the cap of the other. And instead of slits and outward projections of the sleeve to lock by snap action with recesses in the cap against longitudinal movement in the one, there are the bayonet slots in the sleeve to lock with studs in the cap of the other to accomplish the same result without snap action. But these different constructions not only differ radically in structural features but they do not function in the same manner, for locking against longitudinal movement in the one is by snap action upon direct longitudinal thrust of the sleeve into the cap, while the other requires first a longitudinal movement or thrust, and then a rotative movement, without which it is entirely ineffective, whereby it locks against longitudinal movement without snap action.
But it is argued that the infringement lies especially in the locking hole (15) in respondent’s socket and the associated lug which operate by snap action and afford a positive lock against rotation of the two members on each other.
The sufficient answer to this is that the patent in suit makes no suggestion of a lock against the rotative movement of the cap and sleeve on each other and contains no disclosure providing for it, but, on the contrary, because p. 676the beveled sides which are required by claim 4 for the projections on the sleeve permitted such movement, a subsequently patented addition was added to prevent it. The petitioner can not read into the patent in suit the additional slot in the cap and the additional projection on the sleeve of patentee’s second patent, and without them there is no lock against rotative movement in the socket of the first patent to be infringed by the stud snapping into the locking hole of the sleeve of respondent’s socket.
This is sufficient to dispose of the case, but we also fully agree with the Circuit Court of Appeals that the prior art, the file wrapper and the second patent to the same patentee, No. 916,812, supra, require that the expressions in the fourth claim “telescopically received ” and “telescopically applied ” must be restricted to a direct longitudinal movement or thrust of the sleeve into the cap and that for this reason the construction of respondent requiring a rotary movement to render it effective, does not infringe that of the petitioner.
In the application for the patent in suit this fourth claim, originally the seventh, read as we have quoted it omitting the words in italics. In this form it was promptly rejected by the Patent Office on reference to the Getting patent, No. 642,825, and to the Kenney patent, No. 712,- 686, and it is clear that the chief concern of the applicant thereafter was to distinguish his construction from that of Kenney, which is very similar to that of respondent. The Kenney socket has lugs in the cap and bayonet slots in the sleeve, to lock against longitudinal movement, as respondent’s socket has, and also slots with open ends and locking holes similarly placed in the sleeve to lock against rotary movement when the lugs in the cap engage with them. The chief difference between the Kenney and respondent’s socket is that in Kenney the lug passes down the slot to a position opposite the locking hole and p. 677then with the rotary movement mounts and rides over the narrow strip of metal—“the bridge”—into the hole, while in the respondent’s socket the lugs having plain faces ride on the metal near to the edge of the slot during the longitudinal movement and from that position pass into the locking holes with the rotative movement.
When his application was rejected by the Patent Office on reference to the Kenney patent thus described, the applicant, without objection or appeal, amended his claim seven (numbering it four) by adding the words in italics and in his explanatory “remarks,” when submitting these amendments, it was said: “Claim 4, originally 7, is now drawn to a specific structure having advantages not found in either of the references cited. By transversely slitting the sheet metal shell and displacing the wall on one side of said slit to form a beveled or inclined projection the parts are permitted to be applied to each other by simply inserting one within the other without manually compressing the inner member.” And again, “Kenney’s device is adapted to unlock by simply rotating one member upon another in the same manner that the parts are locked together, no manual compression of the inner member being necessary.”
Thus the patentee, in order to avoid infringing Kenney’s construction, voluntarily restricted himself to a “specific structure ” operative when the sleeve was “simply ” inserted in the cap, without suggesting any rotary movement whatever, but, on the contrary, by his reference to Kenney as locking and unlocking by “simply rotating one member upon another,” clearly implying that no such rotary movement was necessary in the adjustment of his socket. Having thus narrowed his claim against rotary movement in order to obtain a patent, the patentee may not by construction, or by resort to the doctrine of equivalents, give to the claim the larger scope which it might have had without the amendments, which amount to a p. 678disclaimer of rotation as an operative feature of his device. Shepard v. Carrigan, 116 U. S. 593, 598; Hubbell v. United States, 179 U. S. 77, 80.
But that no rotary movement was implied in the use of “telescopically received ” and “telescopically applied ” in the patent in suit is further unmistakably shown by the frequent use of the same or equivalent expressions in the specification and claims of patentee’s later patent, No. 916,812, supra, in which claims 1, 3, 13 and 14 relate almost wholly to an improvement which renders rotation of the members one upon the other impossible and which petitioner added to the construction of the patent in suit before putting the sockets upon the market. That the inventor did not intend to claim, and that he certainly did not disclose, that any such rotary movement was necessary in his socket as was required to render the socket of the respondent effective, is, we think, for these reasons, so clear that it is not necessary to consider the dictionary definitions of the words used, upon which the Circuit Court of Appeals, with sound reason, relied in reaching this same conclusion.
For the reasons thus elaborated, we conclude that the socket of the respondent does not infringe the fourth claim of the patent in suit because there is no claim made therein of a lock against rotative movement of the cap and sleeve upon each other, and also because the file-wrapper and the subsequent patent show that the disclosure is, and was intended to be, limited to a construction operative by direct longitudinal movement or thrust without such rotative movement.
The contention, pressed strenuously upon our attention, that the added open slot in the cap and projection on the sleeve provided for in the second patent were devised simply to secure the alignment of the projections and recesses of the first patent in making telescopic application of the two members to each other, is not p. 679convincing in the presence of the fact that claims 1, 3, 13 and 14 of the second patent are devoted almost wholly to claiming that this improved construction is intended “to prevent relative rotative movement ” of one member upon the other, while only claims 11 and 12 refer, quite incidentally, to what is now claimed to be the chief function of the added parts, that of a guide to the positioning of the recesses and projections of the first patent with reference to each other. Without a guide, the difficulty should not be very great of aligning projections and recesses distant from each other but a fraction of an inch when the edges of the cap and sleeve are in contact. The constructions held by the Circuit Court of Appeals of the Second Circuit to infringe the patent in suit, were so essentially different from that of the respondent that we regard discussion of them as quite unnecessary.
It results that the decree of the Circuit Court of Appeals as to claims 1 and 4 must be
Affirmed.
(no text on this page in the source reporter)
DECISIONS PER CURIAM, FROM MARCH 29,1921, TO AND INCLUDING JUNE 6, 1921, NOT INCLUDING ACTION ON PETITIONS FOR WRITS OF CERTIORARI.
No. 198. Missouri, Kansas & Texas Railway Company et al. v. Hannah L. Zuber. On writ of certiorari to the Supreme Court of the State of Oklahoma. Argued January 28, 1921. Decided April 11, 1921. Per Curiam. Dismissed for want of jurisdiction upon the authority of:
(1) Furness, Withy & Co. v. Yang-Tsze Insurance Assodation, 242 U. S. 430; Houston Oil Co. v. Goodrich, 245 U. S. 440. (2) California Powder Works v. Davis, 151 U. S. 389, 393; Cuyahoga River Power Co. v. Northern Realty Co., 244 U. S. 300, 303; Bilby v. Stewart, 246 U. S. 255, 257; Farson, Son & Co. v. Bird, 248 U. S. 268, 271. See writ of error dismissed, February 28, 1921, 255 U. S. 561. Mr. M. D. Green, with whom Mr. Joseph M. Bryson, Mr. J. R. Cottingham, Mr. Clifford L. Jackson, Mr. Samuel W. Hayes, Mr. Gardiner Lathrop, Mr. C. S. Burg and Mr. Alex. Britton were on the brief, for plaintiffs in error and petitioners. Mr. Charles W. Smith, for defendant in error and respondent, submitted.
No. 194. J. L. Hudson v. O. L. Hopkins, as County Treasurer, etc.; and
No. 195. William E. McGuire, as Administrator, etc. v. E. J. McCurdy, as County Treasurer, etc. Error to the Supreme Court of the State of Oklahoma. Submitted April 12, 1921. Decided April 18, 1921. Per Curiam. Dismissed for the want of jurisdiction upon the authority of § 237 of the Judicial Code, as amended by the Act of September 6, 1916, c. 448, § 2, 39 Stat. 726. Mr. Elmer
Decisions Per Curiam, Etc. 256 U. S.
E. Grinstead for plaintiffs in error. Mr. S. P. Erecting for defendants in error.
No. 245. N. W. Palmer et al. v. Racheal King et al. Error to the Supreme Court of the State of Oklahoma. Submitted March 21, 1921. Decided April 18, 1921. Per Curiam. Dismissed for the want of jurisdiction upon the authority of § 237 of the Judicial Code, as amended by the Act of September 6, 1916, c. 448, § 2, 39 Stat. 726. Mr. C. S. Arnold for plaintiffs in error. Mr. Elmer D. Means for defendants in error.
No. 716. Herbert Darlington v. Harry W. Mager, Collector of Internal Revenue for the First District of Illinois. Error to the District Court of the United States for the Northern District of Illinois. Argued April 14, 1921. Decided April 18, 1921. Per Curiam. Affirmed with costs, upon authority of the Act of February 24, 1919, c. 18, § 213a, 40 Stat. 1057, 1065; Act of September 8, 1916, c. 463, § 2 (a), 39 Stat. 756, 757; Merchants* Loan & Trust Co. v. Smietanka, 255 U. S. 509; Eldorado Coal & Mining Co. v. Mager, 255 U. S. 522; Goodrich v. Edwards, 255 U. S. 527; and Walsh v. Brewster, 255 U. S. 536. Mr. Herbert Pope, with whom Mr. Rush C. Butler, Mr. James J. Forstall and Mr. E. B. Prettyman were on the brief, for plaintiff in error. The Solicitor General for defendant in error.
No. 800. Ulrica Dahlgren Pierce, as Trustee, etc. v. John V. Dahlgren. Appeal from the Circuit Court
OCTOBER TERM, 1929. 683
of Appeals for the Sixth Circuit. Petition for a writ of certiorari and motion to dismiss submitted April 11, 1921. Decided April 18, 1921. Per Curiam. Dismissed for want of jurisdiction upon the authority of Hull v. Burr, 234 U. S. 712, 720; St. Anthony Church v. Pennsylvania R. R. Co., 237 U. S. 575, 577; Louisville & Nashville R. R. Co. v. Western Union Telegraph Co., 237 U. S. 300, 302; Delaware, Lackawanna & Western R. R. Co. v. Yurkonis, 238 U. S. 439, 444. Mr. J. Warren Keifer for appellant and petitioner. Mr. Lawrence Maxwell, Mr. Frederic R. Coudert and Mr. Howard Thayer Kingsbury for appellee and respondent. [Certiorari denied, see post, 692.]
No. —, Original. Ex parte: In the Matter of Thomas G. Moran, Petitioner. Submitted February 28, 1921. Decided April 25, 1921. Motion for leave to file petition for writs of certiorari, prohibition, and mandamus denied. Mr. William J. Hennessey for petitioner.
No. —, Original: Ex parte: In the Matter of Henry 0. Hollander, Petitioner. Submitted February 28, 1921. Decided April 25, 1921. Motion for leave to file petition for writs of certiorari, prohibition, and mandamus denied. Mr. William J. Hennessey for petitioner.
No. 311. City of New York v. Brooklyn Union Gas Company. Appeal from the District Court of the United States for the Southern District of New York. Argued April 29, 1921. Decided May 16, 1921. Per Curiam. Dismissed for the want of jurisdiction upon the
Decisions Per Curiam, Etc. 256 U. S.
authority of the City of New York v. Consolidated Gas Co., 253 U. S. 219. Mr. Vincent Victory, with whom Mr. James A. Donnelly and Mr. Henry Hertzoff were on the brief, for appellant. Mr. William N. Dykman, for appellee, submitted.
No. —, Original-. Ex parte: In the Matter of Exporters of Manufacturers ’ Products, Inc., Petitioner. Submitted May 2,1921. Decided May 16,1921. Motion for leave to file petition for a writ of mandamus and/or a writ of prohibition herein denied. Mr. Henry M. Ward for petitioner.
No. —, Original. Ex parte: In the Matter of C. C. Hartwell Company, Limited, et al., Petitioners. Submitted May 2, 1921. Decided May 16, 1921. Motion for leave to file petition for a writ of mandamus herein denied. Mr. William B. Grant for petitioners.
No. —, Original. Ex parte: In the Matter of D. H. Riddle, Petitioner. Submitted May 2, 1921. Decided May 16, 1921. Motion for leave to file petition for a writ of mandamus herein denied. Mr. Benjamin Carter for petitioner.
No. 288. Houston & Texas Central Railroad Company v. City of Ennis et al. Error to the Court of Civil Appeals, Fifth Supreme Judicial District, State of Texas. Argued April 26, 1921. Decided June 1, 1921. Per Curiam. Dismissed for want of jurisdiction upon the authority of § 237, Judicial Code, as amended by the
Act of September 6, 1916, c. 448, § 2, 39 Stat. 726. See writ of certiorari denied (252 U. S. 583). Mr. Jesse Andrews, with whom Mr. J. L. Gammon and Mr. H. M. Garwood were on the brief, for plaintiff in error. Mr. Rhodes S. Baker, with whom Mr. William Thompson was on the brief, for defendants in error.
No. 318. Dwelling Building & Loan Association et al. v. Winfield S. MacHenry, Trustee in Bankruptcy. Appeal from the Circuit Court of Appeals for the Third Circuit. Submitted April 29, 1921. Decided June 1, 1921. Per Curiam. Dismissed for want of jurisdiction upon the authority of the Act of January 28,1915, c. 22, § 4, 38 Stat. 803, as amended by the Act of September 6, 1916, c. 448, § 3, 39 Stat. 726, 727. Mr. Joseph Gilfillan and Mr. George S. Graham for appellants. Mr. H. Edgar Barnes and Mr. Owen J. Roberts for appellee.
No. —, Original. Ex parte: In the Matter of The State of Louisiana, Petitioner. Submitted May 16, 1921. Decided June 1, 1921. Motion for leave to file petition for a writ of mandamus herein denied. Mr. L. E. Hall for petitioner.
No. 801. McKittrick Oil Company v. Southern Pacific Railroad Company. Error to the District Court of Appeal, Second Appellate District, Division No. 1, of the State of California. Motion to dismiss or affirm submitted June 1, 1921. Decided June 6, 1921. Per Curiam. Dismissed for the want of jurisdiction upon the authority of § 237 of the Judicial Code, as amended by
Decisions Granting Certiorari. 256 U. S.
the Act of September 6, 1916, c. 448, § 2, 39 Stat. 726. Mr. George E. Whitaker and Mr. Fred Dennett for plaintiff in error. Mr. Frank Thunen for defendant in error. [See post, 695.]
PETITIONS FOR WRITS OF CERTIORARI GRANTED, FROM MARCH 29, 1921, TO AND INCLUDING JUNE 6, 1921.
No. 766. New York, New Haven & Hartford Railroad Company v. David Fruchter, an Infant, etc. ; and
No. 767. New York, New Haven & Hartford Railroad Company v. Sam Fruchter. April 11, 1921. Petitions for writs of certiorari to the Circuit Court of Appeals for the Second Circuit granted. Mr. James W. Carpenter for petitioner. Mr. Leon Sanders for respondents.
No. 776. Auditors Contracting Company, Inc., et al. v. Foreign Trade Banking Corporation. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Second Circuit granted. Mr. Alvin C. Cass for petitioners. Mr. John M. Woolsey and Mr. Delbert M. Tibbetts for respondent. The Solicitor General and Mr. A. F. Myers, by leave of court, as amid curice.
No. 783. Charles W. Anderson, Collector of Internal Revenue v. New York Life Insurance Company. Motion to set aside order granting certiorari submitted April 11, 1921. Decided April 18, 1921. Order granting writ of certiorari herein set aside to enable a
256 U. S. Decisions Granting Certiorari.
resubmission of the petition after due notice to counsel for the respondent. The Solicitor General for petitioner. Mr. James H. McIntosh for respondent. [See 255 U. S. 568; also, post, 696.]
No. 840. Gaston, Williams & Wigmore, of Canada, Limited v. Philip A. Warner. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Second Circuit granted. Mr. Cletus Keating for petitioner. Mr. Joseph P. Nolan for respondent.
No. 846. James S. McKee et al. v. Benjamin Gratz. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Eighth Circuit granted. Mr. Frank H. Sullivan, Mr. Lon 0. Hocker and Mr. George F. Haid for petitioners. Mr. S. Mayner Wallace, for respondent, concurring.
No. 880. Snake Creek Mining & Tunnel Company v. Midway Irrigation Company et al. May 2, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Eighth Circuit granted. Mr. H. R. Mac-Millan and Mr. John A. Marshall for petitioner. Mr. A. B. Irvine for respondents. Mr. J. F. Callbreath, by leave of court, as amicus curia.
No. 901. Southern Pacific Company et al. v. Olympian Dredging Company. June 1, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the
Decisions Granting Certiorari. 256 U. S.
Ninth Circuit granted. Mr. E. J. Foulds and Mr. Elmer Westlake for petitioners. Mr. Thomas E. Haven for respondent.
No. 898. United States v. Wesley L. Sischo. June 6, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Ninth Circuit granted. The Solicitor General for the United States. No appearance for respondent.
No. 911. John P. Kline et al., etc. v. Burke Construction Company. June 6, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Eighth Circuit granted. Mr. Frank S. Quinn and Mr. William H. Arnold for petitioners. No appearance for respondent.
No. 925. Federal Trade Commission v. Curtis Publishing Company. June 6, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Third Circuit granted. The Solicitor General and Mr. Adrien F. Busick for petitioner. Mr. John G. Milburn, Mr. Joseph W. Welsh, Mr. John G. Milburn, Jr., and Mr. Ralph B. Evans for respondent.
No. 931. Federal Trade Commission v. Winsted Hosiery Company. June 6, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Second Circuit granted. The Solicitor General and Mr. Adrien F. Busick for petitioner. Mr. Henry P. Molloy for respondent.
No. 933. Fred Browne v. Charles B. Thorn et al., Partners, etc. Error to the Circuit Court of Appeals for the Eighth Circuit. June 6, 1921. Petition for a writ of certiorari herein granted. Mr. James B. McDonough for plaintiff in error, in support of the petition. No appearance for defendants in error.
PETITIONS FOR WRITS OF CERTIORARI DENIED, FROM MARCH 29, 1921, TO AND INCLUDING JUNE 6, 1921.
No. 760. William D. Haywood et al. v. United States. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Seventh Circuit denied. Mr. Otto Christensen for petitioners. Mr. Assistant Attorney General Stewart and Mr. W. C. Herron for the United States.
No. 752. J. B. Flowers et al. v. United States. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Fifth Circuit denied. Mr. W. F. Weeks and Mr. C. C. McDonald for petitioners. No brief filed for the United States.
No. 763. Ellsworth H. Green et al. v. United States. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Eighth Circuit denied. Mr. Samuel Herrick, Mr. Ed. S. Vaught and Mr. John B. Dudley for petitioners. Mr. Assistant Attorney General Stewart and Mr. H. S. Ridgely for the United States.
No. 764. Wagner Electric Manufacturing Company v. Lamar Lyndon. April 11, 1921. Petition for a writ of certiorari to the Supreme Court of the State of Missouri denied. Mr. Charles A. Houts for petitioner. Mr. Lawrence C. Kingsland and Mr. John D. Rippey for respondent.
No. 769. Mary Flack, Administratrix, etc. v. Atchison, Topeka & Santa Fe Railway Company. April 11, 1921. Petition for a writ of certiorari to the Supreme Court of the State of Missouri denied. Mr. John H. Atwood and Mr. Oscar S. Hill for petitioner. Mr. Cyrus Crane for respondent.
No. 772. Charles O’Connor et al. v. John Slaker, Acting Administrator, etc., et al. April 11, 1921. Petition for a writ of certiorari to the Supreme Court of the State of Nebraska denied. Mr. James M. Johnson for petitioners. Mr. John F. Kirkman, p. p.
No. 773. John Barton Payne, as Agent, etc. v. Matthew Foley. April 11, 1921. Petition for a writ of certiorari to the Supreme Judicial Court of the State of Maine denied. Mr. Evan Shelby and Mr. Frank M. Libby for petitioner. Mr. Richard E. Harvey for respondent.
No. 787. J. Sidney Smith v. United States. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Eighth Circuit denied. Mr. John Lee Webster for petitioner. Mr. Assistant Attorney General Stewart and Mr. Roy C. McHenry for the United States.
No. 788. Charles M. Thompson v. United States. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Eighth Circuit denied. Mr. John Lee Webster for petitioner. Mr. Assistant Attorney General Stewart and Mr. Roy C. McHenry for the United States.
No. 789. Clyde A. Smith v. United States. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Eighth Circuit denied. Mr. John Lee Webster for petitioner. Mr. Assistant Attorney General Stewart and Mr. Roy C. McHenry for the United States.
No. 825. Edward A. Shedd et al. v. Calumet Construction Company. April 11, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Seventh Circuit denied. Mr. Fred Barnett for petitioners. No appearance for respondent.
No. 753. Filer & Stowell Company v. Diamond Iron Works. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Seventh Circuit denied. Mr. W. G. Henderson, Mr. Frank E. Dennett and Mr. Louis A. Lecher for petitioner. Mr. Frank A. Whiteley for respondent.
No. 765. Panayiotis Panoulias v. National Equipment Company. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Second p. 692Circuit denied. Mr. Frank C. Briggs for petitioner. Mr. Livingston Gifford and Mr. William Quinby for respondent.
No. 794. John R. Bailey v. Mississippi Home Telephone Company. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Third Circuit denied. Mr. Thomas M. B. Hicks for petitioner. Mr. J. Fred Schaffer for respondent.
No. 800. Ulrica Dahlgren Pierce, as Trustee, etc. v. John V. Dahlgren. Appeal from the Circuit Court of Appeals for the Sixth Circuit. April 18, 1921. Petition for a writ of certiorari herein denied. Mr. J. Warren Keifer for appellant, in support of the petition. Mr. Lawrence Maxwell, Mr. Frederic R. Coudert and Mr. Howard Thayer Kingsbury, for appellee, in opposition to the petition. [Appeal dismissed, see ante, 682.]
No. 815. Samuel Vernon Estate, Inc. v. John J. Lyttle, as Receiver and Trustee, etc. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Second Circuit denied. Mr. Frederick Seymour for petitioner. Mr. Emanuel J. Myers for respondent.
No. 833. Seaboard Transportation Company v. Boston, Cape Cod & New York Canal Company. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the First Circuit denied.
Mr. Edward E. Blodgett for petitioner. Mr. Thomas H. Mahony for respondent.
No. 834. John W. Yates v. Charles R. Smith, Executor, etc., et al. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Third Circuit denied. Mr. Samuel E. Darby for petitioner. No appearance for respondents.
No. 836. Standard Portland Cement Company v. J. R. Foley. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Fifth Circuit denied. Mr. Augustus Benners for petitioner. No brief filed for respondent.
No. 841. William Barber v. Otis Motor Sales Company. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Second Circuit denied. Mr. Samuel E. Darby for petitioner. Mr. Oscar W. Jeffrey and Mr. Robert D. Eggleston for respondent.
No. 842. City of New York v. Lyndon R. Connett et AL., ETC. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Second Circuit denied. Mr. Vincent Victory for petitioner. Mr. Samuel Seabury for respondents.
No. 861. Standard Oil Company, as Owner, etc. v. The Steamship Falls City, etc. April 18, 1921. Petition for a writ of certiorari to the Circuit Court of Ap-
*OCTOBER TERM, 19?0.**
peals for the Fourth Circuit denied. Mr. J. Parker Kirlin, Mr. John M. Woolsey, Mr. Edward R. Baird, Jr., and Mr. Robert S. Erskine for petitioner. Mr. H. H. Little for respondent.
No. 782. George N. Baxter v. William M. Safford et al. April 25, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Sixth Circuit denied. Mr. George N. Baxter pro se. Mr. Lawrence Maxwell, Mr. Charles P. Rogers, Mr. Henry H. Glassie, Mr. B. E. Hinton and Mr. Constant Southworth for respondents.
No. 790. Carl A. Martin et al., etc. v. Presidio Mining Company et al. April 25, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Ninth Circuit denied. Mr. William Denman for petitioners. Mr. R. T. Harding, Mr. Henry E. Monroe and Mr. J. J. Dunne for respondents.
No. 780. J. C. Dysart v. United States. April 25, 1921. Petition for a writ of certiorari to the Circuit Court of Appeals for the Fifth Circuit denied. Mr. Cecil H. Smith and Mr. William H. Atwell for petitioner. Mr. Assistant Attorney General Stewart and Mr. W. C. Herron for the United States.
No. 781. Boston & Maine Railroad v. Timothy J. Desmond. April 25, 1921. Petition for a writ of certiorari to the Superior Court of the State of Massachusetts denied. Mr. Frederick N. Wier for petitioner. Mr. James H. Vahey for respondent.